Content from none77 - HWzone Forums
adplus-dvertising
Skip to content
  • Create an account

none77

registered user
  • Number of messages

    6,339
  • Join

  • Recently visited

  • Days Won

    14

Anything published by none77

  1. There are devices that test the power over time, which in the link it is desirable to replace the head so that there is grounding, a modern computer at rest consumes about 40 W per hour.
  2. To increase uptime as they do on servers do raid 1. In any case it is not a backup place.
  3. The TDP no longer says much a few generations, TDP according to Intel is the power of the processor according to the workload determined by Intel which is probably less than the average effort test at default frequency, in this case 3.7GHz in practice the frequencies and powers are much higher and determined by PL1, PL2 and boost frequencies. PL2 (250W) should work for a short time, in practice most boards by default PL2 runs unlimited or there is a slowdown due to temperature like this case, and sometimes also other problems for example of warming of the VRM, opens the discussion you need to change mode, both your board and cooling Yours is not built for frequencies that the CPU can reach at continuous operation, or that you lower maximum power, or voltage or frequencies, etc., it does not seem to me that you are in the business of breaking records quickly, performance loss will be minimal if at all, and smartly you can improve performance Lower at lower temps without decelerations like @Moon-Mage does, look what temp you reach, you reach Tj-max which is the temp that causes the CPU to slow down, the CPU knows how to work, sometimes other components do not, so the rule of thumb is to be about 10 -20 degrees below this temperature, it varies greatly depending on the board, memories, cooling, etc. https://www.extremetech.com/compu ting / 311414-intel-shares-pl1-pl2-and-tau-values-on-10th-generation-cpus https://www.hardwaretimes.com/intel-10th-gen-cpu-power-consumption-explained-pl1 -pl2-and-tau /
  4. Your CPU has 10 cores that can reach 5.3 GHz, what do you do with the computer? In short, I would switch a power supply to a modern one with a larger power supply, and probably a fan as well, maybe if you make one of the recommendations recommended to you regarding the CPU you can stay with the fan at a 5-10% performance loss that you would not feel anyway.
  5. The power of the package of your actual processor is 264W which is a lot, I would try to limit this value in the BIOS to 150W assuming that the turbo boost will work according to this power automatically, the value is PL2.
  6. Regular fan? The illustration you provided refers to argb fans through a controller.
  7. What is the case? What is a video card? What is the cooling? What is the power supply? The board if not something for such a processor as hinted at. The temperature is high and the CPU slows down so as not to overheat, by and large it is working properly and in normal mode there should be no blue screen because of this on the CPU side, on the other hand it is not advisable to be in this temperature range in normal mode because there are less monitored components. Make sure all the fans are rotating, assuming the CPU cooling is reasonable and well connected I would do undervolting, manual underclocking to stay away from the temp, performance loss is not expected to be noticeable, or alternatively limits the time the board allows the processor to run automatically, Intel went crazy with this processor frequency and power To be in the No. 1 game processor tests, in the next generation they improved the temp.
  8. Unsuccessful combination, its VRM area looks basic, there is likely to be a slowdown in effort, assuming you meant the i9 10900.
  9. Download and assemble and that's it. It is advisable to update BIOS first. No need to reinstall an operating system, maybe one or two restarts. Look for a memory that suits you, it does not have to come in a kit, it is desirable that they be the same. In the manual of the motherboard it is written that it is possible to remember that the chips are on one or two sides which is good. Check online if it is possible to put a single stick of 8GB, if 6 memories are not required, check that it is possible with the fan.
  10. The processor from Ali Express. Memories. https://www.amazon.com/Patriot-Signature-PC3-10600-Desktop-PSD34G1
  11. The system has been operating steadily for about two years. I had an i7 930 that I replaced with a Xaone on my own, no problems. I tried a little fast, I did not have patience at the time, preferably also faster memories. The frequency of the memory is 666x2. For this the name DDR. Double data rate 1333MHz. 12MB of memory was enough for me, I also did not want to invest too much. thermalright-ultra-120-extreme
  12. Take a look here https://asia.canon/en/consumer/imageclass-lbp623cdw/specification?category=&subCategory= At 1200/1200 dpi list eq with of technology (equivalent) in short 1200 this is a technology that reaches (in theory) a print quality similar to 1200 dpi not real 1200dpi .
  13. Greater speed can be made for the more 'successful' cores Raisen Master shows who they are.
  14. Your memory is 2133MHz. Your board supports up to 2400MHz, sometimes the board and processor let do the speed to higher speed, sometimes it is blocked, in your case even if possible it will be limited because your board is not z170, also the benefit in your case will be negligible, in short the cheapest 2400Hz memory regulation you find, If there is a good price for higher speeds also possible, are you now on xmp in the BIOS?
  15. Upload an image from disk management, the disk may not be formatted, remove portable drives and USB drives.
  16. To know for sure you need to open the bearing, sometimes it means destroying the fan, usually if you do not register anything it is a sleeve bearing. Even if you register a long lasting fan etc.
  17. Note that it is listed next to the file you are downloading that the file name needs to be renamed. Download a non-beta version. (I understand you only need to change the name if you use the USB flashback tool). In a normal installation the file needs to be extracted from the zip, perhaps because the board did not recognize that it is a BIOS file.
  18. Did you reset BIOS? Make sure the video card is securely connected and that all connections from the carrier are connected properly. According to the link it is related to a video card, because it was not before a reasonable chance that it is the BIOS, if not working you will return to another version as Jacob suggested, you will also see what the lights indication on the board. https://www.asus.com/us/support/FAQ/1029959/
  19. Excellence temp. If you are already diving into it check with prime95 for 20 minutes and with the cinebench loop at a similar time, also check what the frequencies are.
×
  • Create new ...

At the top of the news:

new on the site