Content HelpSupport - HWzone Forums
Skip to content
  • Create an account


registered user
  • Number of messages

  • Join

  • Recently visited

  • Days Won


Anything published by HelpSupport

  1. Try -> Problem-site-series .15545420 / # post-144549829
  2. Thanks for the update Next time RTFM before asking.
  3. Switching to fiber optics will only require the addition of a fiber optic media converter. The modem must support 35B VDSL standard for Bezeq infrastructure. Those you found do not support and I, unfortunately do not find.
  4. Why replace? What is the reason? In principle, if the Bezeq device is working, you can use it only as a modem and in the AX3000 Archer AX50 from TP-LINK as a router.
  5. From the Bezeq product user guide -
  6. Connect the TP-LINK AC750 with a network cable to your computer directly and replace the IP address with another address outside the DHCP range provided by the new router. Instead of address for example to address Once set up, connect the network to its original state. Put a sticker with the IP you set under the device so that you do not forget its address.
  7. Did you go into the BIOS to check if Mitzad is enabled? No hardware component is needed enough to allow the bios in the BIOS to upgrade. Check if your computer is suitable for upgrading with the software provided by Microsoft
  8. Which BIOS version is installed on the motherboard? The latest version is F63d. This version automatically causes the AMD PSP fTPM to be enabled.
  9. Have you tried to reset the device? Reset - Press and hold it for 5 seconds or above to restore to factory default settings. Read the user guide ->
  10. Try Optimized Default - F7, then F10 to save and exit. After the computer restarts, check the BIOS settings again for WIN11 compatibility - that Secure Boot is in ACTIVE mode and the TPM is on (PTT). You failed - try to get help from Asus Israel - 073- 2248174
  11. Check if the BOOT has a CSM Support setting and is in Disabled mode
  12. I saw that not only you managed to change the IP for this router -> How about changing the entire network to
  13. Link to all Bezeq firmware -> There are several firmware - note your G1 or G2 or V1 router version
  14. For this purpose you must convert the "disk" from MBR to GPT -> Instructions for running a conversion tool built into the MBR2GPT operating system -> -mbr-disk-gpt-move-bios-uefi-windows-10 After conversion change bios to UEFI.
  15. Check if the motherboard is updated to the latest BIOS version F6 and if not updated.
  16. Reinstall the software, but this time run the installer as "Administrator" - right-click on the file and select "... as Administrator" in the menu.
  17. @ danielhr99 Buy any wireless network adapter with a USB connection as a built-in replacement.
  18. I therefore proposed replacing a heat sink suitable for the processor. @ 114508534 Have you set the GTX 1660 TI video card to be used as the default card for regular work? Watch ->
  19. @ 114508534 does not see a problem with the data. By the way - what is the computer used for?
  20. @Moon-Mage "135W. Very cute that you record 135W that we saw his processor take over 250W." TelWh - 125W According to Intel data -> to-5-30-ghz.html @ 114508534 Upload data with other software Quick CPU ->
  21. Did you enable XMP in the BIOS? See the manual Page 6 - XMP - Change to Enable does not recommend "playing" with voltages (undervolting) The heat sink you bought is not so suitable for the processor model you purchased - in the CPU data (TPD (Thermal Design Power may reach a maximum consumption of 135W) Coolant I would recommend for purchase - Dark Rock Slim BK024 ->
  • Create new ...

At the top of the news:

new on the site