Content for liav12 - HWzone Forums
adplus-dvertising
Skip to content
  • Create an account

liav12

registered user
  • Number of messages

    5,234
  • Join

  • Recently visited

  • Days Won

    1

Everything published by liav12

  1. I mean my motherboard is not suitable for small cases? The MSI X470 Gaming Plus is not talking about super tiny cases, but something like the CoolerMaster Q500L or style. Do you think there is a smaller case than the monster I have that will fit?
  2. Hi because of the space on the table and in the room in general I would like to replace the case I have that is in the title, with a smaller mini case that will contain the system. This is a 2600X processor, VEGA64 video card and MSI X470 board. Will moving beyond such a package cause a significant increase in temperature that will require more powerful cooling from me? Currently the processor with stock cooling, may be replaced with 3600X with the same cooling stock. Thank you very much.
  3. Bottom line such a specification for a 60HZ screen is pretty overkill, because no matter how much FPS you get over 60 it will be pretty redundant. Recommend freeing up or saving some extra amount for a screen of at least 120+ HZ. I am with 75HZ and the gap is very noticeable from 60 and also from 120 and 144 respectively (above already quite unnecessary).
  4. I have seen this solution. Unfortunately it did not work for me \ = more than I put the last BIOS before the beta (7B79vAG) on the USB, I logged into the BIOS to install and made the input to M-FLASH. The computer does a restart to enter the BIOS but what is it just gets stuck on a black screen and does not go into installation at all just like what happens after I put the new processor. I had to reset by removing the battery for about 10 minutes to get it back to its previous state. What a complication they made with these boards that God will help them. Jabberwock The screen does not turn on at all, I waited like this for about 10 minutes. The screen writes NO SIGNAL Although it is connected exactly as it was connected with the previous processor, nothing has changed, I tried to connect the same thing to the TV. Nothing helped.I'm returning the processor to my brother because unfortunately I have nothing to do with it at the moment.
  5. For me, the DRAM lighting is just on all the time after replacing the CPU. I returned to 2600X it works fine. I checked if there is support for the above memories and on the MSI website it says yes .. I gave up. I will try for the last time the 7B79vAG BIOS
  6. This is what I did, I updated a few versions before and still do not have the exact same result. Aside from the very ugly UI left with the above BIOS due to lack of space according to what MSI reports. What are the chances that my memories are not supported by the 3600X processor, but yes by the 2600X? I have not seen any special reports on the net
  7. I tried everything, took out a stick of memories and swapped places with both of them in all the sockets there are. I switched to another BIOS again (for the third time). XMP was canceled on my own because I had recently uninstalled and reset CMOS. I lost hope .. for now the 2600X was returned. The 3600X was perfectly fine, got off my brother's computer which is currently running 5800X.
  8. Hello. So yesterday the 3600X processor came to me from my brother after he upgraded to 5800X. The board in question is MSI's X470 GAMING PLUS. The current processor is 2600X. The current video card is R9 390X. The memories are Geil SuperLuce RGB Sync 8GBX2 3000MHZ. The steps I did: * Copy the BIOS to a simple USB drive and connect to a computer at one of the ports on the back. * Restart the computer and install the BIOS via M-FLASH (of course passed successfully and the BIOS has changed). * I updated Bios to the latest beta on the MSI website which is 7B79vAK2 (Beta version). * I checked that the 3600X processor is working properly without crooked pins and goes into the bracket without any problems. * I replaced the CPU with a new one, and the computer turns on, but there is no display on the screen, the DRAM light is on for some reason on the board, the fans of the CPU / card and the case are rotating, there are no special rings. * I returned to 2600X and the computer is back to normal. What am I doing wrong? Is the version of the BIOS not good and would I prefer another version? Is there anyone who has managed such a transition without problems and can say which version of the BIOS works for him? Thank you.
  9. After several unsuccessful attempts by Logitech / Corsair and the like on expensive mechanical keyboards for no good reason, I neglected and bought something nice called AULA 2098, which beyond a high level of finish and a quality metallic body I got a great mechanical keyboard with a bluish / crystal clear switch like the usual blue, Very comfortable, feels really high quality, and cost around $ 60 with shipping from Amazon. For now, after half a year of use and heavy games with it, I'm pretty happy, good software for controlling RGB for those who like it, metal keys for controlling Windows operations, very pleasant to type on, Low Profile keys. Disadvantages: Non-modular switch unfortunately (whoever wants can order a blue / brown switch keyboard, etc.). The palm rest is plastic but still comfortable (not like the Razor pillows etc of course) https://www.amazon.com/AULA-Mechanical-Keyboard-Floating-Keys-Switches/dp/B07ZCH7ZF8/ref=sr_1_1?dchild= 1 & keywords = AULA + 2098 & qid = 1612262109 & sr = 8-1
  10. Hi friends, I wanted to know - I have a Hot converter and I would like to connect it to the TV wirelessly, is there an option by any component in this case? I'm tired of the cables and the converter sits far away from the TV, which requires me to run many long wires on the wall. Thanks.
×
  • Create new ...

At the top of the news:

new on the site