Aviram Ohana Content - HWzone Forums
Skip to content
  • Create an account

Aviram Ohana

registered user
  • Number of messages

  • Join

  • Recently visited

Anything posted by Aviram Ohana

  1. Why not ? There is. I bought the Z490 ASUS GAMING E, at about 1450, a very high-end tablet, and not that expensive. Attitude .. and there are boards from this series also in 800
  2. Well then after the bad service I got from the manager of the Eilat branch - Sheeran who twice ran the fans back and forth and teased me and my dad from Ashkelon to Eilat (it turns out that all he had to do was send it to the lab - to Dvir in Netanya) and not try to be a great sage And tell me "the fans are okay" because they were not okay, and the fact that he does not understand the field, and he is not a technician - just teased me more, instead of doing what every customer service person would do a referral to the lab !! And that was the end of it in a few hours. (Credit me, wanted to return full money, I said no - I asked for a mouse instead - and got them - new properly packed, everything was fine) So like this: Suddenly last week, one morning, my computer started to have problems and crashed .. Code error on motherboard In QLCD it was 55 (says there are no memories installed) even though there were 4 RGB 4X8 dominators straight I realized it was the memory .. after a little clarification, it turns out that one of my quartet was knocked out. It was Wednesday .. I called them, they came back to me after half an hour Thursday they had already arranged a delivery for me - arrived that day really, Thursday, and the memories were taken .. Sunday at 11 in the morning, I called Dvir from the lab at TMS in Netanya "Yes Aviram, the memory is already Tested, found to be defective, will send to an importer, who will probably give you a new kit ..) because I bought two kits of 16, so of course I had to send the second stick that came with it .. well then today is Monday, and the memories came back to me a little while ago (Not yet assembled on the computer, but I got a new kit, what are the chances of there being a problem? Zero, I hope even if there is this or that problem I hope not to be with them, it is not their fault, as I got new opaque memories in their original packaging. So Dvir said he believes That it will arrive by Wednesday Thursday, and here it is less than 3 working days it has already gone back checked, passed in the lab and at the importer and it is fast - agile - efficient and good !! Really wish every customer to receive such service (from Kirill who turns out he handled my order) thing Another, which is important to note, the delivery costs 45 shekels from me to them - although the memories were about a month old, it means that I have to pay for this delivery but not wipe The money from me included, the store absorbed these shipments on their account. Needless to say, it's not your fault the memory went bad. So Kirill, and Dvir in short in one word inhale! Aviram Ohana.
  3. Hi my friend .. yes it was a long distance sale, my father came to collect the parts I ordered on the site .. Anyway today I got back from TMS there is an update a nice guy named 'Dvir' the lab manager in Netanya came back to me and told me what I thought I would hear the fans malfunction, yes I checked them, sorry, in Eilat they are not technicians, they could not know that .. (So why did they check in the first place?) Maybe they wanted to be nice? I was taught, and it's so true ... with good intentions you go to hell and say to the credit of Sheeran, the manager of the Eilat branch, that "Pirgan" gave me a used cattle that they had a name .. so he really tried .. but sometimes, it really is not related - the product Really stumbling and another RGB freak like me will not notice it? No situation .. one light bulb on my computer will make a problem I will see the rebellious and fall on it with solder immediately !! So he said they are not OK, they now know again to the Eilat branch, I talked to the Eilat branch, they told me to place the order on the mouse I wanted instead of their website, and they will order it and only when the fans come to the Eilat branch, after two more days, they can win me .. (which is a bit strange and not what I wanted) I expected them to win now, to make the credit now (to come to him when they come. What do I care? But yaaallahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh I have the mouse already on Saturday .. I will wait until next week, who will bring it to me already on holiday ...... not terrible .. Yaala .. I compromised .. I do not have the strength to argue either .. (do not want to be marked problematic customer with them) What I can give up in a normal setting, I will give up in my part .. So I gave up (or what a graduate I am) lol This is, it's a conclusion: Too bad he did not send it straight to Dvir in the lab would have solved the problem in a few days .. but I'm sure he learned This mistake ..
  4. LAW89 KSP are better in service, because it will malfunction, they replace immediately, probably within 14 days !!! That this is my biggest problem .. The manager of the Eilat branch claims - they were opened, it is impossible to return .. Well, how do I open a friend and see that they are not working properly? And they also came to me with "open" packaging without a sticker or anything so what is he rattling about? He tried to sweep it under the rug, thought I had no way to move it to Eilat, that I am their sucker .. I will not give up, and I will show him that not only was he wrong, he also lost a good customer and treated me with disgust (leave I heard him swear said pussy Emek or something like that after he thought he hung up and did not hang up the call (because I told him good bye bye) and the call was not hung up.and that the TMS executives will see it and decide what to do with such an employee .. who once takes the law into his hands checks like he has a lab there and no He's also a tester who's comfortable with him. I also ask him - why did you give me a controller if you tell me it's a software thing, that I need Fusion software (which is GIGABYTE software in general) and I have an ASUS board with AURA software. So why a controller? From miles people do not understand in this big field called computers .. maybe in networks and software he knows something hardware, I do not think !! And do not tell me that you need a controller that will function as a splitter, because a splitter for ARGB is a total thread, and also, do not need it at all because every fool who connected Ever ARGB fans know you can thread them .. Female to board - male of the same fan to female of the next fan and so on will thread 60 fans (if you have enough powerIn the board to move all the LEDs (depending on the type of fan and manufacturer) left, he chatters .. As for your statement, there is no such thing as TMS better than Ivory or KSP better than both .. I will bring you customers who will curse the three stores and there are customers who will love each one. Depends on the service .. (I'm as soon as Moran told me, you do not care what I do for you you will not be satisfied) that he totally knows me from the phone, we talked exactly the first time, so I realized he is not really looking for help he is looking to browse .. and me not Browse! @ I'll tell you, I was the manager of the Ivory branch, I opened the Dizengoff branch of Ivory I personally opened a series of goods on the shelves .. I know from this service there are people, who I would later call, well what happens, what about the computer? Everything is good (and I know that everything is good, just for the customer's feeling) I know from this to give service from this they would fly at me, then they would come to the mall they would come in to say hello come come tell me Aviram what computer I am super happy pity the time (and I just sit with the customer Next and sells him a computer) were pleased with me as if I designed, built and molded the plastic with which they assembled the computer .. What a good, how beautiful, you were right, it suits me, and millions of other compliments .. So service, I still do to the customers I had From her name - and I am today Ashkelon 10 years later .. So what does he tell me like that anyway? Do you understand 9 Where is the most serious defect in this person that Alek runs the branch in Eilat? Very bad and a pity that it's just a pity, but it's a pity for them, not me, so what do I care ..?
  5. After I recognized that it was Moran from Eilat who called me, to tell me that he connected them and they are OK (okay for him it turns around) so I am waiting for the fans who will come to Netanya now, so that their technician, Dvir will check them and see the problem. After seeing the problem, hope he wins me .. and maybe even apologize on behalf of the store because they once said an incompatible board once said a definition in the BIOS (what? What's the connection?) Once said need a visit once said, need fusion software (hahahahahahaha I have ASUS board is not GIGABYTE and he knows it) What will I do? Apart from laughing at his wisdom and knowledge, Elek Adon manages ... I will not give up - I will get my credit of 150 shekels, and I will buy an M570 mouse, and that's it, no closer to this store. (Unless they tell me, Moran Elek, manager of the Eilat Potter branch, sorry, there was a mistake, mistakes happen. There is nothing to do. We humans will be happy if you continue to purchase from us) Because either there is a lab in Eilat and he tests the goods, or not. If there is, why am I waiting for it to arrive in Netanya if not, why did he at Kalazat check it last time and decide to send it to me again wrong?!?! Maybe so that the 14th day will pass and then he will roll it on to the Netanya branch just like he did ..?! It was agreed that we would wait for Dvir to receive them, check if he could operate them .. I have a board running, every strip I connect, ARGB and also RGB, and also working fans and everything .. I am a RGB freak, my whole house is LEDs, will he teach me about it LED? Of course not ..
  6. Shit Bitcoin, because of all these miners, I bought an RTX3060 STRIX 12GB for 3500 shekels.
  7. What is most delusional, is that Moran is calling me now from the Eilat branch, at first I do not identify, and he said to me: Aviram the fans are OK, I connected them and they are working ... I told him they are working? Ok send me a video that I will see what you did .. So he says, I do not have a lab here, and a computer with Windows, but they go around I connected them and saw (when he knows the problem is in the lighting and not really in the fan that does not turn) so what exactly did you check? I did not understand and then he says: oh and also delete your response in WARZONE, not HWZONE .. because it is really not true you received excellent service .. you will argue with a customer who feels that the service is not good .. so why did you call Malachi? And that it's within 14 days I'm already said? It has not even been a day since I found out .. and only on the 13th it came to Eilat again and then it was sent to me again, and so on ...
  8. And also, it's a cable at all, that if you do not have enough ARGB ports on the controller, you connect it .. although you can thread from any fan, because each fan has a male to a controller and a free female and then you push the male of the next fan and so on, so why cable at all such a ?! My friends are right, the service is bad, and even at such not good prices .. I do not know what I went to buy her name is stupid like me .. I already ordered the RTX3090 STRIX at KSP, that's for sure.
  9. Kirill, you're making a bitter mistake, when they sent me the Koolmaster master controller with the Maori, it came with such an adapter - just like you mentioned, which is a 1 to 3 splitter instead of 1 to 5, as you have in the picture, a micro USB has already been connected to the computer. Himself and came a set of small teeth (male and female adapters of the cattle) so how do you offer me such a splitter, which is really really not the problem. See my friend, I came out of a simple assumption, and it is: If I connected the three fans to the controller, to connect the fans number 1-2-3- one colored worker - two others do not work, or one LED lights up .. (out of the 9) then come We'll check if their port is not good, port 1 sure works because here it is lit in ARGB color changer .. Ok let's move the fan I know it works to port 2 - and it also worked ok let's move the fans from connections 2 and 3 to connection 1 See if we turn on? No, did not turn on .. Okay, connect everything as it was again, 1-2-3, and again, one works, the other two do not ... On a Kollmaster master controller - there is no chance that one of them or two of them will not work the same, all the fans Need to work the same way, everyone must have the exact same lighting effect. And it's not a matter of software, it's not a matter of anything. It's just not right. Then, I connected the fans I have at home to visit, they work great .. I connected an ARGB strip to each of the controller outputs, a great worker I have 4 ARGB fans and a LED strip, on my computer at the moment, which work great .. I have such a set in the living room of three 120 fans RGB, works great (their effect always changes in the same way) If I turn one off, everyone will turn off, if one is half green, the two are also half green .. It is important to note - the fans turn, only the RGB lights do not work .. (I suspect - or That someone has ever opened them, and they are connected to 12V instead of 5V because the converter is very similar .. or do not know what already)
  10. I'm from Ashkelon, and my father lives in Eilat .. In his kindness he offered, let's buy you a computer, from Eilat, that's how it will be 17 percent less than a word I live there .. The offer was accepted by a majority of votes and we bought, I9 10850K processor Z490 GAMING E Dominant RGB 8X4 And cooling for the D15 processor so far everything is fine, and here's the problem ... I also bought three ARGB Coolmaster fans .. after the Coolmaster website listed that they work with ASUS AURA .. I connected them and they do not work - I connected others, and they work .. probably Faulty fans .. In a conversation with the store, they made guesses like "need a BIOS setting" "need a controller" and all sorts of offers like "sell them with two hands" and such .. completely strange answers .. I returned them to Eilat by no means Way, and they came to the store .. in the store they said "they are OK" what they did in the store, connected one fan to the controller (and it worked ..) and the two years, not working ... what did they do? Call my dad, let's take it, here it works ... show him a video, with one fan .. my dad what do you understand about these things?!?! He's a driving instructor at all (not a stupid person, but does not understand it) and relied on what the store told him .. on what Sheeran 'manager' of the store told him more correctly .. well, he came to me Saturday, I connected the fans, and wonder and wonder, Again - do not work .. or semi-work .. I do not know the effect of LEDs, in which only one LED lights up out of the 9, and no matter which button I press, nothing helps, and they do not work .. Now again, wait for Sunday, send the The fans to Eilat .. to come .. and then again ... we will see what excuse they have this time why they do not work ... I will update on developments .. as they are .. health for everyone - Aviram (my opinion is always to buy in Ivory or KSP, because its name is always returned Instead, if you do not want the product, it is easy and material if it is not working within 14 days ..) and it is a pity that this is how a store treats customers, and loses them ..
  11. Hi I connected the Arduino Nano that I got or rather the LED strip for leg number 2 I also connected the GND from the Arduino to the LED strip and the strip, to a voltage source (5V) I of course connected the LEDs to a voltage source of 5 arrow in the right direction now I copy software impression her leg 2 instead 7 that was originally and records 30 LEDs as it is, instead of 60 and gets such an error message, after 10 attempts, it fails to copy it to Arduino Arduino: 1.8.13 (Windows Store (Windows 10), board: "Arduino Nano, ATmega328P "In file included from C: \ Users \ Aviram Ohana \ Desktop \ sketch_jul03a \ sketch_jul03a \ sketch_jul03a.ino: 1: 0: C: \ Users \ \ Documents \ Arduino \ libraries \ FastLED-master / FastLED.h: 14: 21: note: #pragma message: FastLED version 3.003.003 # pragma message "FastLED version 3.003.003" ^ ~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~ Sketch uses 3634 (11%) of the available software storage volume. The maximum volume is 30720 bytes. Global variables use 277 bytes (13%) of dynamic memory, leaving 1771 bytes to store local variables. The maximum space is 2048 bytes. An error occurred while uploading a sketch avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 1 of 10: not in sync: resp = 0x80 avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 2 of 10: not in sync: resp = 0x80 avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 3 of 10: not in sync: resp = 0x80 avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync ( ) attempt 4 of 10: not in sync: resp = 0x80 avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 5 of 10: not in sync: resp = 0x80 avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 6 of 10: not in sync: resp = 0x80 avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 7 of 10: not in sync: resp = 0x80 avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 8 of 10: not in sync: resp = 0x80 avrdude: stk500_re cv (): programmer is not responding avrdude: stk500_getsync () attempt 9 of 10: not in sync: resp = 0x80 avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 10 of 10: not in sync: resp = 0x80 This report could have been more detailed if the "Show verbose output during compilation" option had been enabled in the File -> Preferences menu. what could be the problem ? I do not understand . Screenshot
  12. Have you tried replacing a cable? Sometimes the cable that sits in the same position for many years, you twist it down a little bit it is ripped from the inside .. If not I really suggest opening to see if there is a flimsy component on power supply
  13. Bios update I had to do and add all the support for XEON processors
  14. Hi, I have a P43T ES3G board with Q6600 processor I recently bought a W5430 processor which is 771 I tried to connect the processor to the board, and the computer goes up, but comes to Windos - and what should I do? I have bios F7, there is a sticker on the processor hiding two pins as it should be and the chinese seller also probably made it '' flaws '' so I can connect it to my board because I realized that it sits a little differently but still to no avail - the Windus course I return the old processor to The Windus costs anyone experienced in MOD from 771 to 775 ?? I also saw a video, there is a board like mine and the same processor model (almost E5450) and it runs and also the guy did an overclock so what should I do? Anyone know? Attached video
  15. Well, I still do today, and I did not post on this site, but I asked because I was happy to see the project logs I posted here, comments I posted and all such photos I mostly uploaded !! A little to mention nostalgia for me. Obviously today no one will buy Dreaml, which costs NIS 250, if the whole case with the window costs 150 but again, that's not the point ... I wanted to see what I once did ...
  16. Many years ago I was very active here, today I do not care where all my project logs disappeared .. in which were mad modeling logs some of them are mine too ..
  17. I have a jungle like that that costs less than 20 shekels.
  18. You can not . Because you won't be able to push a power supply what you can do to go buy a 3V power transformer (two batteries that have 1.5 each double 2 of course open it, and you will see that the battery home runs two wires, red and black should be a plus plus and minus and minus of course Drill a hole, insert the cable inside and that's it.If you want to use such a USB charger, then cut the cable where you are naturally comfortable with 4 lengths of red and white and green USB cable. White and green Do not relate to red Connect a 100 Ohm, it will lower the voltage to 3.0 instead of 5 coming out of this charger and that's it successfully
  • Create new ...

At the top of the news:

new on the site