Problem operating computer-display signal

[Google 0]

Greetings,

 

I assembled a computer with the following specifications with Power Supply From a previous computer.

The first time I turned on the computer there was 1 long beep and 2 short beeps without a display.

After messing with the connections, somehow the matter worked out and there was a proper beep.

The problem right now is that in different situations, the display suddenly stops and restarts,

There are abnormal beeps, like the first time and again somehow after tinkering it works out.

I still have not found what exactly causes the computer to return to normal mode until next time.

 Could it be related to the power supply, which is too weak for the new specification?

 

Processor  AMD RYZEN 5 5600X

Gigabyte B550M DS3H motherboard.

8GB X2 memory

MSI RTX3060 Ti video card

Optical Drive ASUS DVD-R

Transcend Hard Disk NVMe M.2 1TB

Power Supply Antec HCG-620w 80 plus BRONZE

[ad]

[PeteRoy 0]

if you have Power Supply New and proper check with him it will be the best.

 

Maybe it's a memory problem that is not sitting well enough, take out the memory and insert again and make sure it fits well.

Do the same with all the power supply wires, which are all connected and you have connected all the electrical connections to the board and did not forget one by mistake, check with the guide of your board Page 13: https://download.gigabyte.com/FileList/Manual/mb_manual_b550m-ds3h_e_v1.pdf

 

Make sure you have installed all the parts according to the instructions on the motherboard: https://download.gigabyte.com/FileList/Manual/mb_manual_b550m-ds3h_e_v1.pdf

[Moon-Mage 249]

You will find in the manual of the board if what the beeps say.

[Google 0]

Thank you!