God-GRone Comes in a cardboard box when it is well packed and protected with a soft sponge from all directions. Excellent choice of IN WIN With material that will keep the package and its content well in transit.
With the case
Along with the case itself, we receive a user manual, some cable wiring cuffs, screws for anchoring fans and drives, two sticks attached to the chassis designed for the power supply and two power adapters 3PIN Molax for use in fans. I do not have many complaints about this bunch of accessories, but I'd love to see a few more handcuffs. It seems that there is always a shortage in building a complex system.
A closer look
This is how theGRone Looking ahead. It is important to note that with the sample we received, the front part of the dust filter was damaged (probably during delivery) and was not anchored to the clips. Switching such a system from plastic to iron would solve the problem.
The front part is divided in half with a little bit of sophistication on the part IN WIN. While the top three covers can be retrieved for the purpose of installing optical drives or fan controllers, the entire lower part facing the air inlet openings is removed at once and made of a single piece of plastic with a filter on the other side. Retrieving the mechanism (if it worked in our sample) is simple. All marble is pressed on it and it goes out, its repetition is also done with a click.
The front-GRone Includes everything related to connectivity and monitoring. Where we will find the four interfacesUSB The front (two of them are of the same type 3.0), The power button, the reset button, and the indicator light that operates when the volume is on. On the right side there is a simple controller that switches between the maximum speed of the fans and a lower speed. In fact, it switches between the operating voltage of the 12 volt and that of the 7 volt to the connected fans.
If we move another bit up to the roof of the chassis is an interface SATA External docking drives. It is suitable for both 2.5 and inch sized drives for standard size 2.5 inches. This is a respectable addition that will make it easier for many to spare them the use of external docking boxes inUSB. In addition, of course, this is a very fast interface.
The rest of the chassis looks particularly interesting, and you certainly do not encounter such a design in any case. IN WIN
Chose a space-something design for the case. On the sides there is sleep Network
Which is used to emit warm air from the chassis, as well as to the openings in the white part of the roof.
This is how theGRone On its side and this is its most conspicuous angle in terms of design. Although there is also black, she chose IN WIN To send us a white sample for the purpose of presenting a product that is least seen in the market. The side carries a light blue plastic window that is designed in a conventional way. Below we'll see how the hardware looks through it.
This is the other side of theGRone And it's quite simple. In front of the motherboard cradle area there is an opening used to enter cold air into this hot area.
The back of the case is fairly standard. It includes four holes for pipes Cooling
Water If an external radiator is installed, openings to the motherboard ports provide power and eight openings to the motherboard interfaces. There is an 140 millimeter opening for a pre-installed fan and more holes for ventilation on the right side.
The bottom of the case includes four plastic legs along with two dust filters. One of these filters is designed to supply the power and the other to the fan which can be installed at the bottom of the chassis. Unfortunately, these are simple dust filters that are not easy to remove. The feet are not accompanied by rubber bands to prevent noise and scratches. This is one of my first disappointments from this package, since investing in these little details brings points to points.